English

I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)

I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V) Umfanekiso okhoyo
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)
  • I-SMD LED Flexible Strip SMD2835 LED STRIP LIGHT(12V/24V)

Inkcazelo emfutshane:

Iimpawu ze-LED ezilawulwayo ngoku, ixesha elide kunye nokusebenza okuphezulu, i-CRI ephezulu, yenzelwe ukubonelela ngokukhanya okuhambelanayo okuhambelanayo kwiintlobo ezahlukeneyo zezicelo zokukhanyisa i-cove kunye nezibane ezingathanga ngqo kwiihotele, iivenkile, iivenkile, iiofisi kunye namakhaya.


Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimbonakalo

Ibhodi ye-PCB eguquguqukayo, iintlobo ezahlukeneyo zokungena manzi kwiindawo ezahlukeneyo;
Iimitha ezi-5 ngeril nganye, zisikwa ngokobude obuchaziweyo;
Kulula ukuyifaka kunye nokugcina, ukusetyenziswa okubanzi;
Ukukhanya Okugqithisileyo, kunye ne-engile yokujonga i-120 degree;
Ukonga umbane kunye nolondolozo lwendalo esingqongileyo, ubomi obude;
Ukusebenza kwamandla ombane aphantsi (DC12V/DC24V) kukhuseleko lomntu, imibala eyahlukeneyo ekhoyo.

Isicelo

Izibane zokuhombisa zangaphakathi nangaphandle zehotele, ibhokisi yokukhanya yentengiso, i-KTV, njl.
Ubume bomhlaba, izibonelelo zokuhlala okanye zoluntu;
Iimpawu zeNtengiso, iibhokisi ezikhanyayo;
Ukukhanya okuLayina kwe-LED;
Ukukhanya kwipaseji kaxakeka;
Ukukhanya kokuhlobisa izakhiwo;
Ukukhanya kokuhlobisa kwecontour;
Uluhlu lwe-LED olucacileyo;Ukukhanya kwe-LED yokuthengisa;
Ukukhanyisa kwemoto kunye nesithuthuthu;
Isibane esikhulu ngasemva Isibane Isibane sefestile;
Ukukhanyisa kwe-LED yeKhabhinethi;Umboniso wokukhanya kwe-LED;UkuKhanya kweMyuziyam ye-LED;
Ukukhanyisa kweKitchen ye-LED;Bonisa ukukhanya kwe-LED;UkuKhanya kwe-LED yobuGcisa;
Izibane zokuhombisa iiholide, umboniso kunye nezibane zomboniso;

Ubungakanani

SMD-02

Ipharamitha

Uhlobo lwe-LED 2835
Icandelo elinguNomb. I-HXD2835-60 I-HXD2835-120 I-HXD2835-180 I-HXD2835-240
I-Voltage 12/24V
LEDs/m 60 120 180 240
Watts/m ≤4.8W/M ≤9.6W/M ≤14.4W/M ≤19.2W/M
Ukubaleka Ubude 5/10imitha/roll
CCT WW/NW/CW/Red/Green/Blue/Yellow/Golden/Purple/Orenji
IP Rating IP20/IP65/IP68

Izincedisi

imveliso-01

Izihlanganisi ze-DC ezingenamanzi

imveliso-02

Iziqhagamshelo ( zomcu ongangenwa ngamanzi)

imveliso-03

ngocingo isidibanisi esingangeni manzi

imveliso-04

Iikliphu zeSilicon IP65

imveliso-05

Iikliphu zeSilicon IP20

imveliso-06

Ukugqiba icap

Isikhokelo sokusebenza (Ayinamanzi)

1.Sika imicu yokukhanya kwindawo “yesikere”
2.Beka iPCB kwisithuba esiphakathi kwekliphu kunye nesinxibelelanisi, yenza iziqeshana zijolise ngqo kwindawo yokuwelda.
3. Vala isiciko sesiqhagamshelanisi
4.Beka iPCB kwisithuba esiphakathi kwekliphu kunye nesinxibelelanisi, yenza zombini iziqeshana zijolise ngqo kwindawo yokuwelda.
5.Vala ikhava yesiqhagamshelo

imveliso-07
imveliso-08
imveliso-09
imveliso-10
imveliso-11

Isikhokelo sokusebenza (ungangeni manzi)

  1. Sika imicu yokukhanya kwindawo yophawu" isikere".okanye ngeeledi ezi-3 zonke
  2. Vula i-siliconglue cap kwaye utofe ijeli ye-silicon kwi-endcap ngaphandle kwemingxuma
  3. Gcoba imicu kwi-cap yokuphela kwaye uvumele i-silicon gel yome ngeyure enye
  4. Beka intambo yokudibanisa ngokusebenzisa imingxuma ekupheleni cap
  5. Solder ucingo kwi-PCB
  6. Emva kokusoda ezi ngcingo zimbini ngokuchanekileyo, tyhala imicu kwi-cap yesiphelo ngeengcingo ngononophelo
  7. Tofa ijeli yesilicon kwisiphelo sentloko
  8. Qinisekisa ukuba isiphelo se cap kunye nomcu zidityaniswe kakuhle kwaye uvumele i-silicon gel yome ngeyure enye
imveliso-12
imveliso-13
imveliso-14
imveliso-15
imveliso-16
imveliso-17
imveliso-18
imveliso-19

Umzobo woQhagamshelwano

ukunikezwa Amandla

imveliso-20

Qaphela: Phantsi kokusetyenziswa, ingcebiso yamandla inokuba nkulu nge-20% kumandla oMvu we-LED wokuqinisekisa ukuqaqamba okufanayo kunye nokusebenza kakuhle kwexesha elide lobonelelo lwamandla.

Phawula

1.Nceda usebenzise iimveliso ezahlukeneyo zereyithi ye-IP ngokweemeko ezahlukeneyo zokusingqongileyo;
2.Notice akukho umonakalo kwisekethe PCB phantsi kofakelo;
3.Adopt unikezelo lwamandla olufanelekileyo ukuze utshatise imicu ekhokelayo.Amandla ngama-20% makhulu kune-max.power yeentambo ze-LED ukuqinisekisa ukusebenza kwexesha elide lonikezelo lwamandla;
4.Yalela ukuyifaka xa umbane uvuliwe.phambi kombane, nceda uqinisekise ukuba i-wiring ichanekile nje ukuba ufakelo lugqityiwe;
5.Ukuze ufumane eyona mpembelelo yokukhanyisa kwaye akukho monakalo.Ubude obuqhubekayo buzimitha ezili-15;
6.Nceda ungajongi ukukhanya ixesha elide xa kusebenza ukukhusela amehlo akho;
7.Kuphela ngabasebenzi abaqeqeshiweyo abanokuphelisa kwaye balungise.

SMD-01

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala